Rupert Neve Designs Newton Channel

MODEL                            Designs Newton Channel

BRAND                            Rupert Neve Designs                            

PRODUCT                        MIC PREAMP                     

COLOUR                          BLACK  

SPECIFICATION

Mic Gain

12-position rotary switch that controls the microphone preamp gain in 6dB steps. For line level input signals, set the Mic Gain to the “0dB” position.

48V

Push-button switch that illuminates RED when +48V Phantom Power is engaged.

Ø (Polarity)

Push-button switch that illuminates AMBER when engaged and inverts the phase of the preamp signal.

TRIM

31-detent potentiometer that allows the user to adjust the preamp gain within a range of +/- 6dB.

HPF

Push-button switch that illuminates GREEN when the high pass filter is engaged.

FREQ

31-detent potentiometer that allows the user to adjust the cutoff frequency of the Sallen-Key high pass filter within a range of 20Hz to 250Hz.

EQ IN

Push-button switch that illuminates GREEN when the EQ section is engaged.

LF

31-detent potentiometer that controls the amount of boost or cut for the low frequency shelf within a range of +/- 12dB.

60/150

Push-button switch that selects between the two available low frequency shelf frequencies: 60Hz (OUT) and 150Hz (IN).

MID FREQ

31-detent potentiometer that controls the frequency of the midband peaking EQ within a range of 220Hz to 7kHz.

MID

31-detent potentiometer that controls the amount of boost or cut for the MID FREQ peaking EQ within a range of +/- 12dB.

8K/16K

Push-button switch that selects between the two available high frequency shelf frequencies: 8kHz (OUT) and 16kHz (IN).

HF

31-detent potentiometer that controls the amount of boost or cut for the high frequency shelf within a range of +/- 12dB.

COMP IN

Push-button switch that illuminates GREEN when the compressor section is engaged.

THRESHOLD

31-detent potentiometer that controls the compressor threshold range from +20dBu to -30dBu. When the input signal rises above the set threshold level, compression begins with a soft-knee at a 2:1 ratio.

RELEASE

31-detent potentiometer that controls the compressor release time. The overall timing range available is 50mS (FAST) to 500mS (SLOW). Note: Attack time is fixed at 20mS.

GAIN

31-detent potentiometer that controls the compressor make-up gain within a range of -6dB to +20dB.

PRE EQ

Push-button switch that routes the compressor section ahead of the EQ section when engaged.

SILK

Illuminated push-button switch that toggles through the three available SILK modes: OFF, RED, and BLUE.

TEXTURE

31-detent potentiometer that controls the amount of SILK harmonics added within the transformer output stage when SILK is engaged.

GR and OUT Metering

8-segment LED meters that indicate compressor gain reduction (dB) and output level (dBu).

POWER

LED that illuminates GREEN when the Newton Channel is powered ON.

मिक लाभ

12-स्थिति वाला रोटरी स्विच जो 6dB चरणों में माइक्रोफ़ोन प्रीएम्प लाभ को नियंत्रित करता है। लाइन लेवल इनपुट सिग्नल के लिए, माइक गेन को "0dB" स्थिति पर सेट करें।

48V

पुश-बटन स्विच जो +48V फैंटम पावर चालू होने पर लाल रंग को प्रकाशित करता है।

Ø (ध्रुवीयता)

पुश-बटन स्विच जो चालू होने पर एम्बर को प्रकाशित करता है और प्रीएम्प सिग्नल के चरण को उलट देता है।

काट-छांट करना

31-डिटेंट पोटेंशियोमीटर जो उपयोगकर्ता को +/- 6dB की सीमा के भीतर प्रीएम्प लाभ को समायोजित करने की अनुमति देता है।

एचपीएफ

पुश-बटन स्विच जो हाई पास फ़िल्टर लगे होने पर हरा रंग प्रकाशित करता है।

फ्रीक

31-डिटेंट पोटेंशियोमीटर जो उपयोगकर्ता को 20 हर्ट्ज से 250 हर्ट्ज की सीमा के भीतर सैलेन-की हाई पास फिल्टर की कटऑफ आवृत्ति को समायोजित करने की अनुमति देता है।

ईक्यू इन

पुश-बटन स्विच जो ईक्यू सेक्शन चालू होने पर हरे रंग को प्रकाशित करता है।

वामो

31-डिटेंट पोटेंशियोमीटर जो +/- 12 डीबी की सीमा के भीतर कम आवृत्ति शेल्फ के लिए बूस्ट या कट की मात्रा को नियंत्रित करता है।

60/150

पुश-बटन स्विच जो दो उपलब्ध कम आवृत्ति शेल्फ आवृत्तियों के बीच चयन करता है: 60 हर्ट्ज (आउट) और 150 हर्ट्ज (आईएन)।

मध्य आवृत्ति

31-डिटेंट पोटेंशियोमीटर जो 220Hz से 7kHz की सीमा के भीतर मिडबैंड पीकिंग EQ की आवृत्ति को नियंत्रित करता है।

मध्य

31-डिटेंट पोटेंशियोमीटर जो +/- 12dB की सीमा के भीतर MID FREQ पीकिंग EQ के लिए बूस्ट या कट की मात्रा को नियंत्रित करता है।

8K/16K

पुश-बटन स्विच जो दो उपलब्ध उच्च आवृत्ति शेल्फ आवृत्तियों के बीच चयन करता है: 8kHz (OUT) और 16kHz (IN)।

एचएफ

31-डिटेंट पोटेंशियोमीटर जो +/- 12dB की सीमा के भीतर उच्च आवृत्ति शेल्फ के लिए बूस्ट या कट की मात्रा को नियंत्रित करता है।

कंप इन

पुश-बटन स्विच जो कंप्रेसर सेक्शन चालू होने पर हरे रंग को प्रकाशित करता है।

सीमा

31-डिटेंट पोटेंशियोमीटर जो कंप्रेसर थ्रेशोल्ड रेंज को +20dBu से -30dBu तक नियंत्रित करता है। जब इनपुट सिग्नल निर्धारित सीमा स्तर से ऊपर उठता है, तो संपीड़न 2:1 अनुपात पर नरम-घुटने से शुरू होता है।

मुक्त करना

31-डिटेंट पोटेंशियोमीटर जो कंप्रेसर रिलीज समय को नियंत्रित करता है। उपलब्ध कुल समय सीमा 50mS (तेज) से 500mS (धीमी) है। नोट: हमले का समय 20mS निर्धारित है।

पाना

31-डिटेंट पोटेंशियोमीटर जो -6dB से +20dB की सीमा के भीतर कंप्रेसर मेक-अप लाभ को नियंत्रित करता है।

पूर्व EQ

पुश-बटन स्विच जो लगे होने पर कंप्रेसर सेक्शन को EQ सेक्शन से आगे रूट करता